> Made in Cordura with Double sewed and Flat Felled seam.
The Wing is made with high quality and robust material such as the Cordura and it is double sewed with a flat felled seam, an extremely strong closed seam. This Wing is made to a last.




How the Flat Felled seam is made:








Quickly Harness :
> No buckles and no seams but fully adjustable webbing. A single webbing harness with Super quick fit and comfy equipment removal.
Enlarge the shoulder straps of the Quickly and wear it, then pull both the straps on your waist to adjust the harness. That's it, you are ready to go. When you have to remove the equipment just open the stainless steel belt buckle and enlarge the shoulder straps to easily remove the Quickly Harness.




> D-Ring and Pockets are always in place.
Stainless Steel D-Rings and side pockets of the Quiclky Harness fixed on the staps of the Quickly but they are not moving with the webbing. The Quickly Harness system allows the webbing to move below the D-Rings and the Pockets, so they are perfectly in place even if the strap is moving.




> New Surface Marker Pocket for Backplate with hidden stainless steel screws.
The New Design of the SMB Backplate Pocket of the Quickly hides the x8 M6 stainless steel low-profile screws that secure the Pocket to the Backplate. A better-looking design that protects your suit from rubbing.





> CE Certified as BC (Buoyancy Compensator).
The MOD Quickly Mono is CE certified as a complete BC.
No assembly required




DATA SHEET:



Wing and Harness SPECS:


Mono Donut Wing (Patent Pending):
Lift Capacity (Single-Tank only): ≈ 30 lb (≈ 13,5 kg)
Wing Outer Shell: Cordura® 1000
Inner Bladder: Polyurethane Soltane F/B 400® (user interchangeable)


Quickly Harness:
Fully adjustable Tech Harness with no buckles and no seams
Technical crotch strap with front and back D-Ring
Protective pads in High-Density Supratex Neoprene on shoulder straps
Regular Tech Backplate in Stainless Steel, Aluminum or Carbon Fiber
Backplate pocket for SMB in Cordura® 1000
2 Front Pockets in Cordura® 1000
AISI 316 Stainless Steel D-Rings
Belt Buckle in AISI 316 Stainless Steel


Inflator and Valves:
Traditional piston inflator
Short Inflator hose with soft oval pipe and inner metal wire
1 Overpressure and exhaust valve


Included Accessories for Quickly Mono:
Single Tank adaptor in Stainless Steel, Aluminium or Carbon fiber
Short quick connect LP hose
x2 50mm Tank strap with cam buckle for Single tank



Weight:
≈ 5 kg if Stainless Steel Backplate and STA
≈ 2,2 kg if Aluminum Backplate and STA
≈ 1,6 kg if Carbon Fiber Backplate and STA