Name: DiveSystem MilPro Combat S.O.F.
Brand: DiveSystem MilPro
SKU: MS-02

Construction details

Combat S.O.F.

01

Over-the-shoulder back zipper

Closes with a front closure point: the operator can check alone that the zipper is fully closed and, in an emergency, can open it without assistance.

02

Removable Kevlar® knee pads

Housed in a pocket built into the knee, made of 2 mm high density neoprene with Kevlar® lining. They protect the joint when kneeling, are configured to the mission profile and can be replaced quickly.

03

Knee with double Kevlar® protection

A first thin, flexible layer covers the whole knee; a second reinforcement in Kevlar®-lined neoprene covers the central area, where wear is greatest, without restricting movement.

04

Extended Kevlar® protections

Kevlar® reinforcements on lower back, crotch, buttocks, knees, wrist and ankle tighteners, where abrasion and wear are greatest.

05

Preformed knees

The “pence” preform the knee and follow its movement even at full flexion. Originally designed for climbing rung ladders during boarding.

06

MOLLE system in Hypalon

MOLLE panels on the legs, with waterproof Hypalon webbings. Extra panels in other positions on request.

07

MOLLE Safety Lock System

MOLLE pockets and accessories fixed firmly and safely to the suit, without stiffening the garment.

08

Inner belt loops

Waist loops for the inner belt of the duty belt and for a holster with Velcro fastening: a stable fit, integrated with the equipment.

09

Elastic wrist tighteners

Adjustable: they keep the sleeve in position and reduce excess material and snagging.

10

Elastic ankle tighteners

Adjustable: they take up excess material, reduce snagging and improve the fit with boots and fins.

11

Relief zipper

Watertight zipper for relieving oneself without taking the suit off and without compromising the seal.

12

Configurable valve positions

Inflation valve on the leg (for the drysuit inflation cylinder) or on the chest; exhaust valve on the shoulder or on the forearm.

L-07 Built to the unit’s specification We make every component in-house: any product can be modified to a tender specification or an operational requirement, small batches included. Built to specification →

Technical data

Combat S.O.F.

Material	NATO Nylon Trilaminate 4-1-4 Rip-Stop
Sealing	Inside, with Aquasure® polymer
Entrance	Over-the-shoulder back zipper in technopolymer with a front closure point: the operator checks the closure alone and, in an emergency, opens it without assistance using the dedicated hook
Protections	Extra Kevlar® layer on chest, shoulders, back, knees, crotch and buttocks; Kevlar® on the forearms with wrist tighteners
Knees	Preformed; outer protection in Kevlar®-lined neoprene, Kevlar® layer and removable neoprene knee pad
Neck and wrists	Latex (neoprene or silicone on request)
Socks	HD neoprene with Supratex® and speleo boots (integrated boots on request)
MOLLE	Four MOLLE systems on the legs with waterproof Hypalon webbings and Soft Safety Lock System; the vertical MOLLE near the valve houses the drysuit inflation cylinder. Number, size and position can be modified on request
Zipper	Soft puller with Velcro holder
Drainage	Extended drainage system for fast drying
Ankles	Ankle tighteners
Valves	Inlet and outlet valve positions customised to the customer’s requirements
Configuration	For right-handed or left-handed shooters, on request
Standard	EN 14225

Included

Neoprene hood
Drysuit bag
Adjustable internal suspenders
Relief zipper

On request

Loops for inner belt and holster
Oral inflator
Extra valve ports
Integrated boots
Extra MOLLE panels

Mission profiles

I-01 · Underwater infiltration I-02 · Boarding

Available in standard sizes or made to measure. Features, colours and position of the DiveSystem logo can be modified as required by the contract specifications.

Same line