Produit ajouté au panier avec succès
Quantité
Total
Il y a 0 produits dans votre panier. Il y a 1 produit dans votre panier.
Total produits
Frais de port À définir
Total
All the Accessories that you need for your next Scuba Diving Adventure. Proudly Made in Italy
Sous-catégories
Aluminum backplate
Aluminum single tank adaptor
Bolt M10 (oval head) and Self Locking screw nut M10
Weight: 1,25 kg
Carbon Fiber backplate
Carbon Fiber single tank adaptor
Stainless steel Bolt M10 (oval head) and Self Locking screw nut M10
Weight: 0,69 kg
Cordura 1000 Backplate pocket for surface marker buoy
Stainless steel screws included
Big pocket with upward open.
Cordura 1000 with upward open.
Drainage area on the bottom
Dimensions: 24cm x 13xm
Minimal amount of space (empty pocket): 3cm
Upward opening pocket in Cordura 1000.
Dimensions: 13cm x 20cm
Minimal amount of space (empty pocket): 3cm
12cm x 12cm (Recommandé pour 1kg de lest)
Material: Cordura
Downward opening pocket in Cordura 1000.
Dimensions: 13cm x 20cm
Minimal amount of space (empty pocket): 3cm
4 kg capacity
Complete inflator with
600mm corrugated hose.
Plain non-exhaust elbow
Internal safety stainless steel wire
Gasket included
Complete inflator with metallic oral/power inflator.
500mm corrugated hose.
Plain non-exhaust elbow
Internal safety stainless steel wire
Gasket included
Complete inflator with technopolymer oral/power inflator.
500mm corrugated hose.
Plain non-exhaust elbow
Internal safety stainless steel wire
Gasket included
Complete inflator with technopolymer oral/power inflator.
340mm extra-soft corrugated hose.
Plain non-exhaust elbow
Internal safety stainless steel wire
Gasket included
Metallic oral/power inflator (technopolymer body).
Compatible with all DiveSystem inflator system
Technopolymer oral/power inflator (technopolymer body).
Compatible with all DiveSystem inflator system
Stainless steel Bolt M10 (oval head) and Self Locking screw nut M10 (for backplate)
(pair)
Extra flat stainless steel screw M6 (screw + nut)
This price is referred to a single screw + nut
50mm stainless steel cam buckle
Save-tank system to protect the Cylinder from buckle's marks
Overpressure relief and pull-to-dump valve (gasket included)
Compatible with all DiveSystem Air Cells and bladders
Stainless Steel band for
The price is for one band. Is suggested the use of two bands.
5 mt of 50 mm Nylon belt with central M10 eyelet. Can be used to
Knife with plastic handle
Length 14 cm.
Sheath in Cordura 1000 for belt included
Line cutter with plastic handle
Sheath in Cordura 1000 for belt included
Ciseaux avec poignée en plastique
Fourreau en Cordura 1000 pour ceinture inclus
Un indicateur de haute visibilité
Capacité 30 lb
une purge de sécurité/décharge au fond et un clapet anti-retour à l'ouverture du sac.
High visibility marker and deco buoy
Lift capacity 100 lb
bottom safety/dump valve and no-return valve at the bag opening.
Handle for Cylinder with two stainless steel hooks.
50mm nylon buckle
(Cylinder not included)
Poignée pour bouteille avec deux crochets en acier inoxydable.
Boucle en acier inoxydable de 50 mm
Système de protection du réservoir pour protéger la bouteille des marques de la boucle
2 bandes élastiques pour la fixation des fléxibles
(bouteille non incluse)
All the tanks of the world are yours.
Everything you need to configure Side Mount tanks. Every kind of tanks.
(Kit for 1 tank)
Length: 1.80 mt
50 mm belt DiveSystem branded
Stainless Steel Buckle
Solide Spool
Mousqueton à double extrémité en acier inoxydable / crochet de déclenchement inclus
Ligne de polyester ciré de 2 mm incluse (+/- 30 mt)
Capacity: 60 mt
Safety Lock
Stainless Steel Double End Snap / Trigger Hook included
2 mm Waxed Polyester Line NOT included.
Capacity: 110 mt
Safety Lock
Stainless Steel Double End Snap / Trigger Hook included
2 mm Waxed Polyester Line NOT included.
Le meilleur masque pour la plongée technique.
Matériel: jupe en Silicone
Verre tempéré.
Frameless ( sans cadre).
Système de régulation rapide
Couverture de la sangle du masque DiveSystem incluse.
Upward opening pocket in Cordura 1000.
Dimensions: 13cm x 20cm
Minimal amount of space (empty pocket): 3cm
Cire pure (30 gr. +/- 5gr) pour la lubrification des fermetures éclairs.
Bande élastique pour la fixation des flexibles pour les bouteilles de plongée S40 et S80.
(bande unique).
Paire de sangles en acier inoxydable pour Tech Fin. Made In Italy.
Parachute technique en circuit fermé, rempli à l'aide d'une pipette no-lock (avec un tuyau LP ou par la bouche).
