Produit ajouté au panier avec succès
Quantité
Total
Il y a 0 produits dans votre panier. Il y a 1 produit dans votre panier.
Total produits
Frais de port À définir
Total
All the Accessories that you need for your next Scuba Diving Adventure. Proudly Made in Italy
Sous-catégories
Aluminum backplateAluminum single tank adaptorBolt M10 (oval head) and Self Locking screw nut M10Weight: 1,25 kg
Carbon Fiber backplateCarbon Fiber single tank adaptorStainless steel Bolt M10 (oval head) and Self Locking screw nut M10Weight: 0,69 kg
Cordura 1000 Backplate pocket for surface marker buoyStainless steel screws included
Big pocket with upward open.Cordura 1000 with upward open.Drainage area on the bottom Dimensions: 24cm x 13xmMinimal amount of space (empty pocket): 3cm
Upward opening pocket in Cordura 1000.Dimensions: 13cm x 20cmMinimal amount of space (empty pocket): 3cm
12cm x 12cm (Recommandé pour 1kg de lest)Material: Cordura
Downward opening pocket in Cordura 1000.Dimensions: 13cm x 20cmMinimal amount of space (empty pocket): 3cm4 kg capacity
Complete inflator with metallic oral/power inflator.600mm corrugated hose.Plain non-exhaust elbowInternal safety stainless steel wireGasket included
Complete inflator with metallic oral/power inflator.500mm corrugated hose.Plain non-exhaust elbowInternal safety stainless steel wireGasket included
Complete inflator with technopolymer oral/power inflator.500mm corrugated hose.Plain non-exhaust elbowInternal safety stainless steel wireGasket included
Complete inflator with technopolymer oral/power inflator.340mm extra-soft corrugated hose.Plain non-exhaust elbowInternal safety stainless steel wireGasket included
Metallic oral/power inflator (technopolymer body).Compatible with all DiveSystem inflator system
Technopolymer oral/power inflator (technopolymer body).Compatible with all DiveSystem inflator system
Stainless steel Bolt M10 (oval head) and Self Locking screw nut M10 (for backplate)(pair)
Extra flat stainless steel screw M6 (screw + nut) This price is referred to a single screw + nut
50mm stainless steel cam buckleSave-tank system to protect the Cylinder from buckle's marks
Overpressure relief and pull-to-dump valve (gasket included)Compatible with all DiveSystem Air Cells and bladders
Stainless Steel band for double tank.The price is for one band. Is suggested the use of two bands.
5 mt of 50 mm Nylon belt with central M10 eyelet. Can be used to realise a minimalist harness for scuba diving (D-rings, bukles etc. not inlcuded)
Knife with plastic handleLength 14 cm.Sheath in Cordura 1000 for belt included
Line cutter with plastic handleSheath in Cordura 1000 for belt included
Ciseaux avec poignée en plastiqueFourreau en Cordura 1000 pour ceinture inclus
Un indicateur de haute visibilitéCapacité 30 lbune purge de sécurité/décharge au fond et un clapet anti-retour à l'ouverture du sac.
High visibility marker and deco buoyLift capacity 100 lbbottom safety/dump valve and no-return valve at the bag opening.
Handle for Cylinder with two stainless steel hooks.50mm nylon buckle(Cylinder not included)
Poignée pour bouteille avec deux crochets en acier inoxydable.Boucle en acier inoxydable de 50 mmSystème de protection du réservoir pour protéger la bouteille des marques de la boucle2 bandes élastiques pour la fixation des fléxibles(bouteille non incluse)
All the tanks of the world are yours.Everything you need to configure Side Mount tanks. Every kind of tanks.(Kit for 1 tank)
Length: 1.80 mt50 mm belt DiveSystem brandedStainless Steel Buckle
Solide SpoolMousqueton à double extrémité en acier inoxydable / crochet de déclenchement inclusLigne de polyester ciré de 2 mm incluse (+/- 30 mt)
Dévidoir en acier inoxydableMousqueton à double extrémité en acier inoxydable / crochet de déclenchement inclusLigne de polyester ciré de 2 mm incluse (+/- 30 mt)
Capacity: 60 mtSafety LockStainless Steel Double End Snap / Trigger Hook included2 mm Waxed Polyester Line NOT included.
Capacity: 110 mtSafety LockStainless Steel Double End Snap / Trigger Hook included2 mm Waxed Polyester Line NOT included.
Le meilleur masque pour la plongée technique. Matériel: jupe en SiliconeVerre tempéré.Frameless ( sans cadre).Système de régulation rapideCouverture de la sangle du masque DiveSystem incluse.
Upward opening pocket in Cordura 1000.Dimensions: 13cm x 20cmMinimal amount of space (empty pocket): 3cm
Cire pure (30 gr. +/- 5gr) pour la lubrification des fermetures éclairs.
Bande élastique pour la fixation des flexibles pour les bouteilles de plongée S40 et S80.(bande unique).
Paire de sangles en acier inoxydable pour Tech Fin. Made In Italy.
